The index originally stored cumulative values in a CAmount type but this allowed for
potential overflow issues which were observed on Signet. Fix this by
storing the values that are in danger of overflowing in a arith_uint256.
Also turns an unnecessary copy into a reference in RevertBlock and
CustomAppend and gets
rid of the explicit total unspendable tracking which can be calculated
by adding the four categories of unspendables together.
exFAT is known to cause corruption on macOS. See #28552.
Therefore we should warn when using this fs format for either the blocks
or data directories on macOS.
Co-authored-by: l0rinc <pap.lorinc@gmail.com>
f49840dd90 doc: Fix typo in files.md (Ryan Ofsky)
f5cf0b1ccc bitcoin wrapper: improve help output (Ryan Ofsky)
c810b168b8 doc: Add description of installed files to files.md (Ryan Ofsky)
94ffd01a02 doc: Add release notes describing libexec/ binaries (Ryan Ofsky)
cd97905ebc cmake: Move internal binaries from bin/ to libexec/ (Ryan Ofsky)
Pull request description:
This change moves binaries that are not typically invoked directly by users from the `bin/` directory to the `libexec/` directory in CMake installs and binary releases. The goal of the PR is to introduce a distinction between internal and external binaries so starting with #31802, we can use IPC to implement features in new binaries without adding those binaries to the CLI. The change also helps reduce clutter in `bin/`, making it easier for users to identify useful tools to run. Summary of changes:
- For **source builds** (i.e. developer builds) — There are no changes.
- For **source installs** (i.e. `cmake --install` result) — `test_bitcoin`, `test_bitcoin-qt`, and `bench_bitcoin` are installed in `${CMAKE_PREFIX_PATH}/libexec` instead of `${CMAKE_PREFIX_PATH}/bin`, so they are no longer on the system `PATH`. However, they can still be invoked from the `libexec/` directory, or from the CLI as `bitcoin test`, `bitcoin test-gui`, and `bitcoin bench`, respectively.
- For **binary releases** — Since `test_bitcoin` is the only test binary enabled in releases, the only change is moving `test_bitcoin` from `bin/` to `libexec/`.
<details><summary>Details</summary>
<p>
The table below shows the install location of each binary after this change, and the availability of each binary.
| Binary | Location | Availability | Change |
|----------------------|--------------|----------------------|-------------------------------|
| `bitcoin` | `bin/` | 📦 Binary release (since #31375) | Unchanged |
| `bitcoin-cli` | `bin/` | 📦 Binary release | Unchanged |
| `bitcoind` | `bin/` | 📦 Binary release | Unchanged |
| `bitcoin-qt` | `bin/` | 📦 Binary release | Unchanged |
| `bitcoin-tx` | `bin/` | 📦 Binary release | Unchanged |
| `bitcoin-util` | `bin/` | 📦 Binary release | Unchanged |
| `bitcoin-wallet` | `bin/` | 📦 Binary release | Unchanged |
| `bench_bitcoin` | `libexec/` | 🛠 Source build only | Moved from `bin/` |
| `bitcoin-chainstate` | `libexec/` | 🛠 Source build only | Newly installed (was built) |
| `bitcoin-gui` | `libexec/` | 🛠 Source build only (until #31802) | Moved from `bin/` |
| `bitcoin-node` | `libexec/` | 🛠 Source build only (until #31802) | Moved from `bin/` |
| `test_bitcoin` | `libexec/` | 📦 Binary release | Moved from `bin/` |
| `test_bitcoin-qt` | `libexec/` | 🛠 Source build only | Moved from `bin/` |
</p>
</details>
---
This PR is part of the [process separation project](https://github.com/bitcoin/bitcoin/issues/28722).
ACKs for top commit:
l0rinc:
re-ACK f49840dd90
Sjors:
re-ACK f49840dd90
achow101:
ACK f49840dd90
janb84:
re ACK f49840dd90
BrandonOdiwuor:
Tested ACK f49840dd90
hodlinator:
re-ACK f49840dd90
willcl-ark:
utACK f49840dd90
Tree-SHA512: 858a2e1a53db11ee3c5c759bfdeea566f242b9ce5e8a898fa435222e41662b8184577c0dc2c4c058294b4de41d8cb3ba3e5d24c748c280efa4a3f84e3ec4344d
6bfa26048d testnet: Add timewarp attack prevention for Testnet4 (Fabian Jahr)
0100907ca1 testnet: Add Testnet4 difficulty adjustment rules fix (Fabian Jahr)
74a04f9e7a testnet: Introduce Testnet4 (Fabian Jahr)
Pull request description:
To supplement the [ongoing conceptual discussion about a testnet reset](https://groups.google.com/g/bitcoindev/c/9bL00vRj7OU/m/9yCPo3uUBwAJ) I have drafted a move to v4 including a fix to the difficulty adjustment mechanism, which was part of the motivation that started the discussion.
Conceptual considerations:
- The conceptual discussion about doing a testnet4 or softforking the fix into testnet3 is outside of the scope of this PR and I would ask reviewers to contribute their opinions on this on the ML instead. However, I am happy to adapt this PR to a softfork change on testnet3 if there is consensus for that instead.
- The difficulty adjustment fix suggested here touches the `CalculateNextWorkRequired` function and uses the same logic used in `GetNextWorkRequired` to find the last previous block that was not mined with difficulty 1 under the exceptionf. An alternative fix briefly mentioned on the mailing list by Jameson Lopp would be to "restrict the special testnet minimum difficulty rule so that it can't be triggered on the block right before a difficulty retarget". That would also fix the issue but I find my suggestion here a bit more elegant.
ACKs for top commit:
jsarenik:
tACK 6bfa26048d
achow101:
ACK 6bfa26048d
murchandamus:
tACK 6bfa26048d
Tree-SHA512: 0b8b69a621406a944da5be551b863d065358ba94d85dd3b80d83c412660e230ee93b27316081fbee9b4851cc4ff8585db64c7dfa26cb5148ac835663f2712c3d
Save the banlist in `banlist.json` instead of `banlist.dat`.
This makes it possible to store Tor v3 entries in the banlist on disk
(and any other addresses that cannot be serialized in addrv1 format).
Only read `banlist.dat` if it exists and `banlist.json` does not
exist (first start after an upgrade).
Supersedes https://github.com/bitcoin/bitcoin/pull/20904
Resolves https://github.com/bitcoin/bitcoin/issues/19748
Introduce two new options to reach the I2P network:
* `-i2psam=<ip:port>` point to the I2P SAM proxy. If this is set then
the I2P network is considered reachable and we can make outgoing
connections to I2P peers via that proxy. We listen for and accept
incoming connections from I2P peers if the below is set in addition to
`-i2psam=<ip:port>`
* `-i2pacceptincoming` if this is set together with `-i2psam=<ip:port>`
then we accept incoming I2P connections via the I2P SAM proxy.
defe48a51f doc: Update wallet files in files.md (Hennadii Stepanov)
Pull request description:
This PR is a #19077 follow up, and it addresses the [comment](https://github.com/bitcoin/bitcoin/pull/19077#discussion_r504805234):
> If need to update, there are two corrections that could be made:
>
> * Line 69 "Wallets are Berkeley DB (BDB) databases" is no longer true
>
> * Line 76 "Wallet lock file" should say "BDB wallet lock file"
ACKs for top commit:
RiccardoMasutti:
ACK defe48a
meshcollider:
ACK defe48a51f
Tree-SHA512: 39939f86a9c7842bf06913998305dcbd6209585f1da0fe9c274bac0572eb8464e59176884dd9e2b91312f34efad40cdeb4085ec72c2a2c1b33d16b6ab505140c
a490d074b3 doc: Add anchors.dat to files.md (Hennadii Stepanov)
0a85e5a7bc p2p: Try to connect to anchors once (Hennadii Stepanov)
5543c7ab28 p2p: Fix off-by-one error in fetching address loop (Hennadii Stepanov)
4170b46544 p2p: Integrate DumpAnchors() and ReadAnchors() into CConnman (Hennadii Stepanov)
bad16aff49 p2p: Add CConnman::GetCurrentBlockRelayOnlyConns() (Hennadii Stepanov)
c29272a157 p2p: Add ReadAnchors() (Hennadii Stepanov)
567008d2a0 p2p: Add DumpAnchors() (Hennadii Stepanov)
Pull request description:
This is an implementation of #17326:
- all (currently 2) outbound block-relay-only connections (#15759) are dumped to `anchors.dat` file
- on restart a node tries to connect to the addresses from `anchors.dat`
This PR prevents a type of eclipse attack when an attacker exploits a victim node restart to force it to connect to new, probably adversarial, peers.
ACKs for top commit:
jnewbery:
code review ACK a490d074b3
laanwj:
Code review ACK a490d074b3
Tree-SHA512: 0f5098a3882f2814be1aa21de308cd09e6654f4e7054b79f3cfeaf26bc02b814ca271497ed00018d199ee596a8cb9b126acee8b666a29e225b08eb2a49b02ddd
dcf0cb4776 tor: make a TORv3 hidden service instead of TORv2 (Vasil Dimov)
353a3fdaad net: advertise support for ADDRv2 via new message (Vasil Dimov)
201a4596d9 net: CAddress & CAddrMan: (un)serialize as ADDRv2 (Vasil Dimov)
1d3ec2a1fd Support bypassing range check in ReadCompactSize (Pieter Wuille)
Pull request description:
This PR contains the two remaining commits from #19031 to complete the [BIP155](https://github.com/bitcoin/bips/blob/master/bip-0155.mediawiki) implementation:
`net: CAddress & CAddrMan: (un)serialize as ADDRv2`
`net: advertise support for ADDRv2 via new message`
plus one more commit:
`tor: make a TORv3 hidden service instead of TORv2`
ACKs for top commit:
jonatack:
re-ACK dcf0cb4776 per `git diff 9b56a68 dcf0cb4` only change since last review is an update to the release notes which partially picked up the suggested text. Running a node on this branch and addnode-ing to 6 other Tor v3 nodes, I see "addrv2" and "sendaddrv2" messages in getpeerinfo in both the "bytesrecv_per_msg" and "bytessent_per_msg" JSON objects.
sipa:
ACK dcf0cb4776
hebasto:
re-ACK dcf0cb4776, the node works flawlessly in all of the modes: Tor-only, clearnet-only, mixed.
laanwj:
Edit: I have to retract this ACK for now, I'm having some problems with this PR on a FreeBSD node. It drops all outgoing connections with this dcf0cb4776 merged on master (12a1c3ad1a).
ariard:
Code Review ACK dcf0cb4
Tree-SHA512: 28d4d0d817b8664d2f4b18c0e0f31579b2f0f2d23310ed213f1f436a4242afea14dfbf99e07e15889bc5c5c71ad50056797e9307ff8a90e96704f588a6171308
For a couple of years, Tor documentation has made
the term hidden service obsolete, in favor of onion
service.
This PR updates all the references in the code base.
Persistent settings are used in followup PRs #15936 to unify gui settings
between bitcoin-qt and bitcoind, and #15937 to add a load_on_startup flag to
the loadwallet RPC and maintain a dynamic list of wallets that should be loaded
on startup that also can be shared between bitcoind and bitcoin-qt.
Writes the GUI settings to `guisettings.bak` in the data directory
before wiping them. This can be used to retroactively troubleshoot
issues (e.g. #11262) where `-resetguisettings` solves the problem.
Fabian Jahr
Sjors Provoost
willcl-ark
merge-script
Ryan Ofsky
Ava Chow
MarcoFalke
Matthew Zipkin
MarcoFalke
Vasil Dimov
Jon Atack
Wladimir J. van der Laan
Hennadii Stepanov
Andrew Chow
Riccardo Masutti
Russell Yanofsky
Albert
Emil Engler
Jim Posen
MeshCollider
Wladimir J. van der Laan
Pieter Wuille
super3